Multiuse Headphone Stand & Desk Organizer (with USB ports & LED lights) by realhuman0 on Thingiverse: https://www.thingiverse.com/thing:7194367

Summary:
The USB ports need to be added manually – feel free to just remove them and replace them with something else if you want. If you want to keep them, you can either manually solder them together.See this video for how, or use something like these and solder them together. Or you could (suggested) use a pre-made/soldered board, like this board on Amazon. Note I haven't tested these, I manually soldered them.There's also a hole for LED-strip lights (buy them or something similar here) but I didn't use them for mineWill need some gluing. Print with supports if needed. I printed with 10% infill, and it worked fine, but you might need to add weights. (I didn't, but might have just gotten lucky) See the Cura layout image for how I'd lay it out when I'm printing. The print has a part in the back that can come off (you need to hot glue this shut once you've attached the USB ports and the lighting cables) for you to insert the USB ports and other stuff. (Also a secret component lol)Instead of just 3D printing, suggested to make this out of wood (like I did) or something else.Fusion 360 file also attached in case you want to modify this further.